Adya Clarity® Ionic Minerals, 32 oz.

Adya Clarity® is composed of natural ionic sulfate mineral salts extracted from volcanic rock known as biotite mica vermiculite.

• Purified Water: 97.5%
• Ionic Sulfate Mineral Salts: 2.5%

It contains the following minerals (in parts per billion):

• Iron: 1,330.0 PPM
• Magnesium: 451.0 PPM
• Potassium: 271.0 PPM
• Phosphorus: 30.5 PPM
• Calcium: 26.3 PPM
• Manganese: 21.6 PPM
• Zinc: 2.1 PPM

Additionally, Adya Clarity® includes up to 80 trace minerals, such as alum, cerium, chromium, cobalt, copper, lanthanum, lithium, nickel, rubidium, scandium, selenium, silicon, strontium, sulfur, titanium, and vanadium.

Note: As a natural substance, the mineral composition can vary slightly.

Adya Clarity® employs ion exchange technology through its natural ionic sulfate minerals to effectively purify water. The purification occurs in four stages: flocculation, agglutination, coagulation, and deposition.

Stage 1: Flocculation

The ionic sulfate minerals in Adya Clarity® initiate the purification process by promoting flocculation. Charged minerals attract oppositely charged contaminants, such as heavy metals and organic impurities, causing them to clump together into visible clusters for easier removal.

Stage 2: Agglutination

During agglutination, the clusters formed in the flocculation stage combine into larger, more stable aggregates. These larger particles make the contaminants easier to isolate and remove in subsequent steps.

Stage 3: Coagulation

In the coagulation stage, the ionic sulfate minerals neutralize smaller, dissolved impurities, transforming them into insoluble particles. This step ensures even fine contaminants, including organic compounds, are captured for complete purification.

Stage 4: Deposition

In the final stage, deposition (or sedimentation), the heavier insoluble particles settle to the bottom of the container. This process separates clean water from the contaminants, leaving a purified layer of water ready for filtration or consumption.

Structured water, also known as EZ (Exclusion Zone) water, is identified by its UV spectrum absorbance. Research shows that structured water occurs when the UV absorbance at 270nm is 1 or greater. Adya Clarity® exceeds this threshold with an absorbance value of 1.3584, demonstrating its ability to create structured living water.

Adya Clarity® achieves this through its natural ionic sulfate trace minerals, which interact with water molecules to form an organized, structured state. This structured water supports improved hydration and enhanced cellular function, aligning with findings from Dr. Gerald Pollack’s research on the benefits of EZ water.

View the test report at the bottom of our Lab Testing Page.

Adya Clarity® neutralizes/reduces more than 250 harmful substances, including:

• Heavy Metals
• Pesticides & Insecticides
• Herbicides
• Pharmaceuticals
• BPA
• Phthalates
• Disinfectants
• Disinfection Byproducts
• Fluoride
• Man-made Chemicals
• VOC's (Volatile Organic Compounds)
• SVOC's (Semi-Volatile Organic Compounds)
• PCB's (Polychlorinated Biphenyls)
• PAH's (Polycyclic Aromatic Hydrocarbons)
• PAC's (Polycyclic Aromatic Compounds)

For the full list of contaminants, visit our Contaminant Reduction Page.

The amount of Adya Clarity® required depends on the contamination level of the water:

• For reverse osmosis (RO) or distilled water: Use 1/2 to 1 teaspoon per gallon.
• For general water sources (e.g., tap water): Use 1–2 teaspoons per gallon.
• For highly contaminated water: A higher dose may be needed. If the water contains known or unknown toxic substances, proper laboratory testing is recommended to determine the appropriate dilution rate.

One 32 oz. bottle treats up to 250 gallons of water. For example, if you use 1 teaspoon per gallon for daily consumption, a bottle would last approximately 250 days, which is roughly 8 months if purifying 1 gallon per day.

Adya Clarity does not have an expiration date. When stored properly in a dry place between 40–90°F, it will remain effective indefinitely.